DCWV Watercolor Smile Card

DCWV EMBOSSED SMILE CARD TUTORIAL

SUPPLY LIST

DCWVEmbossed White Stack

DCWV Two-Tone Solid Cardstock

Tim Holtz Distress Ink in Dried Marigold, Ripe Persimmon and Seedless Preserves

Ink Blender Tool

Flower Embellishment

Chipboard Letters

Ruler

Scissors or Paper Cutter

Glue or Double Sided Tape and Hot Glue

Spray Bottle and Paper Towel

 

Grab your DCWV Embossed White Stack and find this floral sheet. Using Tim Holtz Distress Inks in Dried Marigold, Ripe Persimmon and Seedless Preserves, blend theses colors around a 7” x 8” area. 

Spritz some water on the paper and let sit for a few seconds, then blot with a paper towel. Repeat this again. 

With your blender tool, and the same distress inks, lightly add more color to the sheet. Make sure you do this lightly so the color only transfers to the raised design on the paper. This will give a little more definition and make the print more visible.

Set this aside to dry.

Find a solid color cardstock that coordinates with your inks. I chose a 2 tone cardstock from DCWV. The other side of this paper is a different shade.

Cut a 7” x 10” piece, and fold it in half.

On the front of the card, measure in 1/8” on the 3 sides. Using scissors or a paper cutter, cut off those 1/8” strips. 

If done correctly, once you fold the card, you will see the second color shade from the other side of the paper. This will give a border effect to the card. 

Cut a piece from your embossed floral sheet. The dimensions will vary, depending on the cut of your card base. I measured my piece so it will be constantly 1/8” smaller on all sides. 

Secure this piece to the card using glue or double sided tape. 

Grab some chipboard letters. I had these darling DCWV Polka Dot letters in my craft stash, but they were silver in color. I wanted them gold, so I grabbed my metallic gold spray paint and sprayed them. If you paint your chipboard, make sure they are completely dry before handling them.

Once you are ready, secure them to the card, centered horizontally. I used a ruler to make sure I applied them straight. 

Since the embossed paper I used was a floral print, I wanted to add some flowers to the card.

I dabbed this white flower on the distress ink pads to get a little coordinating color on them. I then hot glued them to the bottom right corner of the card. 

Now you have your finished card!

Fish Layout

Fish Layout

Starring:

Tayvin and his 2 'glow in black light' neon fish

Supported by:

DCWV products, and a bunch of fun techniques!

Want to recreate this layout with your favorite images?

Grab the following supplies:

DCWV The Birthday Wishes Stack

DCWV DIY Project Birthday Stack

DCWV DIY Project Banners Stack

Folk Art Paint in Light Blue

White Cardstock

Gel Medium

Pallet Knife

Stencil

Wax Paper

Distress Inks

Chipboard Letters

Bakers Twine

Transparent Bubble Dots

Double Sided Tape

Spray Bottle with Water

Find this incredible blue sheet from The Birthday Wishes Stack.

Tint some gel medium with the Light Blue Folk Art Paint.

Use a pallet knife to randomly spread the gel medium over your stencil of choice, onto the paper. Make sure it's in areas that will be visible after you layer your images on.

Pull some distress inks, in colors of your choosing.

On a sheet of wax paper, apply some distress ink in a pattern you like.

Spritz the ink with water.

Flip the wax paper over, quickly and carefully, onto a page of white cardstock. You can use your finger to smear the color around if needed. Take the wax paper off carefully, and throw away. Be careful not to let the ink drip.

While the page is wet, carefully tear out a circle shape.

Set aside to dry

Find this dot page in the DIY Birthday Stack from DCWV. Turn it over and draw a circle. With your finger and some water, trace the circle continually, until the paper is saturated.

Carefully tear the circle.

Your circle does not have to be perfectly round.

Print out 5 images. Both square and rectangle shapes and various sizes.

Mat them with a green sheet from the DIY Birthday Stack, using double sided tape.

In the DIY Banner stack, you will find some pre-printed mini banner flags. Cut out as many as you need. Punch some holes in the corners and string some Bakers Twine through them. Add your chipboard letters.

Start to secure the water color and dot paper to the layout. Add the images and make sure they are secured.

Using double sided tape, secure the banner in the lower right area of the layout. Then stick some cute transparent bubble stickers in the top left corner.

Here is the finished layout!

I would love to see your interpretation of this layout! You can post your images to my Jeri Vann Creations Facebook page, or tag me in your photo on Instagram!

[ Some products used on this project were provided to me for review by DCWV, but all comments, ideas and images are my own ]

Fall Frame

Have you heard about the DCWV large format stacks?

They come in sizes larger then the standard 12x12, and they are perfect for your home decor, party decor or any other larger project you create. These larger stacks come in a variety of prints, colors and even page material.

Fall is almost here, and it's the perfect time to start crafting new home decor.

I used the DCWV 16" x 20" Premium Canvas Stack for this Fall Frame.

 I grabbed some leaves from the tree, covered them with some Tim Holtz Distress Ink and stamped them onto the canvas. I also used some paint sprays to give it more detail. 

This beautiful frame is made from a dirty and worn old pallet. I was hoping for a more rugged look, but once I got the stain on it, it's beauty just came out!

The frame finished at 20" x 16.5".

I cut a few small branches from the tree to make the word FALL. I threw on some burlap faux leaves and a couple pine cones, and it was complete!

[ Some products used on this project were provided to me for review by DCWV, but all comments, ideas and images are my own ]

Music Is Life Accessory Hanger

Hello everyone.

I fell in love with the Project Paper sent to me by DCWV! I love how thick and durable it is, and they offer a great amount of paper on each roll. The paper is offered in so many fun prints, and one of the prints sent to me was Music Notes. 

My niece is very into music and is learning to play the guitar. She is still loving Zebra black and white print with neon pink accents. So I decided to combine her love of music, with her favorite colors with this project. But I wanted to make her something a bit more sophisticated since she just turned 14. I decided to create an accessory hanger for her. I make her jewelry for every Birthday, Christmas or whenever she asks, so I made sure there were enough nails on this board to hold all of her jewelry.

The Project Paper adhered quickly and perfectly to the painted wood board with some Matte Paper Mod Podge.

I made some paper flowers out of some bright, amazing sheets from the Jet Black Stack and the Ocean Breeze Stack. I added BMB Rhinestone Skulls, Neon Pink Beads and an adorable Metal Bow Bead.

The variety of Blue Moon Beads I had on hand, coordinated with my project perfectly!

I secured a BMB Rhinestone on the head of each nail hanger. Adds the perfect amount of sparkle! 

I used some DCWV Chipboard Letters to add 'Music Is Life' to the board.

I used the polka dot stencil from the DCWV DIY Stencil Project Stack with some  Tim Holtz Distress Inks to add some color and detail. I also used a heart stencil around the board.

If you want to get your hands on some of this incredible Project Paper, or any other amazing new DCWV products, head over to Joann's!

[ Some products used on this project were provided to me for review by DCWV, but all comments, ideas and images are my own ]

DCWV DIY Family Frame

I love taking an old item and re-purposing it.

I had this nice frame out on my nightstand, but basically it was just collecting dust. My sister's birthday is coming up and I thought making her a custom frame would be a perfect gift.

First, take the frame apart. Grab a spray paint color you love.

Spray both sides, and of course let it dry. 

I pulled this page from one of the brand new DCWV Mini Album. I love how you can mix and match a bunch of DCWV products that just work perfectly together.

So, with this page, I played with some Tim Holtz Distress Inks and water.

While that dried, I grabbed a fun wood shape and smudged some Milled Lavender Distress Ink. Set aside to dry.

I took the mat out of the frame and covered with with this great DCWV Premium Paper Grey Dot Velum.

Once both sides of the frame were dry, I took this beautiful Grey DCWV Premium Paper cut out sheet and ModPodge'd it to the frame.

Yes, very time consuming, but worth it. Once I had it all secured and cut off the excess, I took a Clear Coat Spray and sprayed over the frame.

While that dried, I grabbed the wood piece. I added this Family word, a butterfly and of course - a Blue Moon Bead Flower Bead!

Now put the frame together.

 Now, the frame is finished and turned out amazing!